DC Power Strip splits 12VDC power from a power adapter to connect other devices (e.g. a flood or smoke detector). Useful for Poseidon 2250, Poseidon2 and Damocles MINI.
The "UPS 12V" is a backup power source for devices with 12V DC power supply. Apart from a stable output voltage of 12V up to 1.5A it provides information of external power supply outage via a built-in relay output. In terms of power supply the "UPS 12V" is compatible with all HW group devices powered by 12V power adaptors.
The "UPS 12V and 5V" is a backup power source for devices with 12V as well as 5V DC power supply which can be powered by the UPS simultaneously. Apart from a stable output voltage of 12V up to 1.5A and 5V up to 0.5A it provides information of external power supply outage as well as of the detailed UPS status to compatible HW group monitoring devices via the 1-Wire UNI output. In terms of power supply the "UPS 12V and 5V" is compatible with all HW group devices powered by 12V and 5V power adaptors.
Double converter to connect two Pt-100 and Pt-1000 probes to 1-Wire UNI (RJ11). One or two external temperature probes can be monitored over LAN (Poseidon2) and GSM (Ares). Typical applications include measuring extreme temperatures in furnaces, coolers, engines, etc
RS-485 bus is used for connecting sensors to a Poseidon unit for up to 1 000 meter distance. RS-485 sensors uses 4 wires connection (A, B, +, -) or standard RJ45 connectors. B-Cable module converts these two ways of connection.
Power-boosted hub for the 1-Wire bus. Compatible with 1-Wire and 1-Wire UNI bus. With 1-Wire hub Power, several sensors with higher current consumption (such as Sensor 60V 1W-UNI or Sensor 20mA 1W-UNI) can be connected to a single Poseidon 2250 unit.
Power hub
S-Hub represents a device which allows connecting RS-485 sensors to Poseidon Family units. The RS-485 bus is connected to the Poseidon model 1250 via TP cables and RJ45 connectors. S-Hub allows connecting up to 8 sensors over RJ45 to a single Poseidon unit. S-Hubs can be connected in series. Though S-Hub's topology can be found similar to Hub on Ethernet it cannot be commuted.
T-Box hub is designed for connecting sensors over 1-Wire bus to Poseidon Family units. The 1-Wire bus is connected over phone cables and RJ11 connectors. T-Box allows you to connect up to 5 sensors to one Poseidon unit. Keeping the limit of total wiring length, hubs can be series-connected.
External Relay output 1W-UNI module allows to expand Ares 12 functionality by remote control of up to 4 relay outputs with a dry contact (NO/NC) capable of up to 50V / 1A load.
1-Wire UNI sensors enables setting and calibration of the measured values, including an option to change the unit type of the value, an exponent and, based on the sensor's type, up to 8-point calibration chart. This allows us to connect various sensors with voltage or current output to Poseidon units via the 1Wire UNI bus..
EDGE router ER75i interconnects equipment with ethernet 10/100 or serial interface via EDGE technology into Internet or intranet – computers, controlling machines (PLC), LAN networks, ATM, cameras etc.
Black montage frame for the reader 600 410 ""RFID reader 232-M1"". Reader is designed as flush fixed, with this frame can be installed to any plate. Require just 3 round holes (one 10 mm for RJ45 connector).
Southco electronic swing-handle for rack/cabinet access systems. Can be extended by HWg-SH2 or HWg-SH3 for Web/SNMP remote cabinet door access control. Supplied with a 4m connection cable.
HWg-SMS-GW3 is a central text message (SMS) gateway that HWg devices and applications in the same network can use to dial numbers or send SMS alerts. Target phone numbers are specified in the sending device or the HWg-Trigger application. The central HWg-SMS-GW3 text message gateway significantly saves costs of external GSM modems as the entire installation only needs one SIM card. Neither additional software nor internet connectivity are needed.
HWg-SMS-GW is a gateway that enables HW group products to send text message alarms. Send SMS alarms from all HW group products in your LAN. No software needed, works over a LAN at the Box-2-Box (Peer-to-Peer) level.
Two 10 pin green connectors for connecting peripherals to a standard I/O Controller2. One connector is also always delivered with every I/O Controller.
A LapLink cable (also known as lablink or null-printer cable) is a cable that allows one to connect two computers together to establish a direct cable connection.
Serial port splitter cable for connecting Poseidon RC Cable (2 relay outputs) to GSM modem. For use with Poseidon 1250 or 2250. 3 Cannon DB9: Cannon DB9F (Poseidon), DB9M for GSM modem, DB9M for P1250 RC (can be connected to PowerEgg).
