Temperature (-30°C to +85°C) and humidity sensor for outdoor use, communicating over 1-Wire bus (MicroLan). The sensor is designed for connecting to Poseidon2, Ares and STE units.
Digital temperature (-30°C to +80°C) and humidity sensor for indoor and outdoor use. RJ11 (1-Wire) interface. Designed to work with Poseidon, Ares and HWg-STE units.
Combined temperature (-10°C to +80°C) and humidity probe for IT environment (1-Wire bus). Fits into a 19" or 10" cabinet (1U size). 2 RJ12 connectors for daisy chaining the sensors, RJ12 cable included. Sensor can be placed to the front or to the back as a 1U device, or fixed to the wall.
Humidity probe (0 - 100% RH) designated for IT environment, for installation into IT cabinets (racks) to a cable bundle. Simple digital temperature sensor for indoor use, communicating over 1-Wire bus (MicroLan).
On request .... Temperature sensor (-10°C to +80°C) with calibration certificate in 3 points (-5°C, 25°C and 78°C). Sensor on 3 meters long cable with 1-Wire connector RJ11, probe encased in white covering with yellow mark.
Temperature probe (-10°C to +80°C) designated for IT environment, for installation into IT cabinets (racks) to a cable bundle. Simple digital temperature sensor for indoor use, communicating over 1-Wire bus
Temperature sensor (-10°C to +80°C) designated for IT environment, for installation into IT cabinets (racks). Simple digital temperature sensor for indoor use, can be daisy-chained, communicating over 1-Wire
Temperature probe -30°C to +60°C (-22°F to +140°F) for outdoor use. The probe in a stainless steel casing is safe for use even in environments such as pharmaceutical or food industry. Suitable for installation in a refrigerator, its flat connection cable can be routed under the door seal.
Simple digital temperature sensor (-50°C to +125°C) designated for outdoor use, communicating over 1-Wire bus (MicroLan). Temp-1Wire is designed for connecting to Poseidon, Ares and STE units.
30A Current probe 1W-UNI 2 is a sensor for indirect (without cutting the wire), single-phase measurement of AC current up to 30A. The split-core current transducer can be opened in order to insert a line wire. The sensor is suitable for monitoring power consumption of racks, BTS’s or server rooms.
Double converter to connect two Pt-100 and Pt-1000 probes to 1-Wire UNI (RJ11). One or two external temperature probes can be monitored over LAN (Poseidon2) and GSM (Ares).
Typical applications include measuring extreme temperatures in furnaces, coolers, engines, etc.
Expansion module for connecting 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc. to the 1-Wire UNI bus (RJ11).
Electrically isolated current sensor for the 1Wire-UNI bus. Sensor for measuring currents in the 0–20mA or 4–20mA range. It is typically used to connect a remote industrial probe (e.g. to measure the fuel level in a tank).
The sensor is designed for measuring of absolute value in the range 100 - 250V AC. You can connect this sensor with bus of 1-Wire UNI. Also you can mount this sensor on DIN rail. The accuracy of measuring is 5%
4 to 20 mA current loop measurement, providing power.
Electrically isolated 4 to 20 mA DC current sensor, 1-Wire UNI (RJ11) output. Electrically isolated, sources current to power an external 4-20mA probe.
Connect an external industrial probe with a 4-20mA current loop output (“sink” type). For example a CO2 sensor or a tank level probe.
Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output. Typical applications include measuring voltage at industrial sensors (0-10V) or battery voltage. Frequently used for -48 volt power supply measurement in telecommunications (-48V standard). Voltage can be monitored over LAN (Poseidon2) or GSM (Ares).
Pt-100 based temperature sensor with 1-Wire UNI output. It contains a Pt-100 probe (-50°C to 200°C, Pt100/A, 2m silicon cable) and a 1-Wire UNI converter (Converter 2xPt100 1W-UNI). The second Pt-100 or Pt-1000 probe can be connected.
Pt-100 based low temperatures sensor with 1-Wire UNI output. Contains a Pt-100 temperature probe (-190 to +150°C, PTFE covered cable 2m,Pt100/B) and a 1-Wire UNI converter (Converter 2xPt100 1W-UNI).
SL5101 calorimetric sensor detects air flow below or above a specified threshold in 1 to 10 m/s range and its output is a normally-open relay contact. The sensor needs a 24VDC power supply.
The LD-12 flood detector is designed for detection of water leaks or detecting excessively high water level. Water detector can be connected to a dry-contact digital input (Poseidon, Damocles, I/O Controller). 12V power, transistor at the...
Detector for indication of flammable gas presence. Sensor detects all types of flammable gasses (natural gas, coalgas, propane, bottle-gas, acetylene, hydrogen, etc.) and offers 2 optional reactions according to gas concentration.
PIR motion detector JS-20 is designed for property protection. It uses multiple signal analyzing method. For high connectivity, the product is equipped with a free pair of terminals. (GBS)
AC Voltage Presence Detector Detector of 110/23V voltage failure, which can be connected directly to a wall plug. Galvanic insulated relay output (NO) can be connected to any digital input (DI) of any HW grup
PowerEgg2 detects failures of power supply (110/230V single phase, max. load 8A) and can be also controlled with a relay. It is possible to connect PowerEgg to any device with digital inputs (DI) and/or digital outputs (DO)
SS14 is a detection device of shocks and vibrations. Is used to protect fixtures, windows, box, or any passage where is needed detect
break-in attempts by vibrations or strong shocks. It 'also equipped with a separate second reed contact normally closed.
Combined temperature and humidity sensor for vertical wall mounting indoor usage. Communication over RS-485 bus with a simple communication protocol. The sensor can be used separately but it was designed to be connected with thePoseidon family units.
Temperature and humidity sensor HTemp-485 T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
Temperature and humidity sensor HTemp-485 T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be used alone, or with Poseidon units.
Sens-485-UI connects two analog current or voltage inputs to the Poseidon unit throught RS-485 bus. DIN rail mounting, galvanic separated analog signals, both channels can be configured to measure voltage 0..15V or current 0..25mA.
Thermal sensor for indoor usage at RS-485 bus (communication over long distances) with a simple communication protocol. The sensor can be used separately but is designed for connection to the Poseidon measuring unit and transmit temperature over SNMP, WEB or XML.
Durable industrial temperature sensor, –30°C to +70°C (–22°F to +160°F), IP65, wall mount. A Pt100 platinum temperature probe is in the tip of the protruding rod.
Temperature probe Pt100/B for low temperatures. Temperature range -190 to +150°C. PTFE covered cable 2m, 4-wires, IP67 probe in in stainless steel tube 50mm.
.jpg)
.jpg)
